commit 7b4b08755d3511476116f5fb6ca0bcc139d30ce8 Author: Johannes Kamprad Date: Wed Dec 2 13:58:50 2020 +0100 first commit diff --git a/.config/dunst/dunstrc b/.config/dunst/dunstrc new file mode 100644 index 0000000..a8a44e5 --- /dev/null +++ b/.config/dunst/dunstrc @@ -0,0 +1,415 @@ +[global] + ### Display ### + + # Which monitor should the notifications be displayed on. + monitor = 0 + + # Display notification on focused monitor. Possible modes are: + # mouse: follow mouse pointer + # keyboard: follow window with keyboard focus + # none: don't follow anything + # + # "keyboard" needs a window manager that exports the + # _NET_ACTIVE_WINDOW property. + # This should be the case for almost all modern window managers. + # + # If this option is set to mouse or keyboard, the monitor option + # will be ignored. + follow = none + + # The geometry of the window: + # [{width}]x{height}[+/-{x}+/-{y}] + # The geometry of the message window. + # The height is measured in number of notifications everything elxse + # in pixels. If the width is omitted but the height is given + # ("-geometry x2"), the message window expands over the whole screen + # (dmenu-like). If width is 0, the window expands to the longest + # message displayed. A positive x is measured from the left, a + # negative from the right side of the screen. Y is measured from + # the top and down respectively. + # The width can be negative. In this case the actual width is the + # screen width minus the width defined in within the geometry option. + geometry = "300x5-30-30" + + # Show how many messages are currently hidden (because of geometry). + indicate_hidden = yes + + # Shrink window if it's smaller than the width. Will be ignored if + # width is 0. + shrink = no + + # The transparency of the window. Range: [0; 100]. + # This option will only work if a compositing window manager is + # present (e.g. xcompmgr, compiz, etc.). + transparency = 16 + + # The height of the entire notification. If the height is smaller + # than the font height and padding combined, it will be raised + # to the font height and padding. + notification_height = 0 + + # Draw a line of "separator_height" pixel height between two + # notifications. + # Set to 0 to disable. + separator_height = 2 + + # Padding between text and separator. + padding = 8 + + # Horizontal padding. + horizontal_padding = 8 + + # Defines width in pixels of frame around the notification window. + # Set to 0 to disable. + frame_width = 3 + + # Defines color of the frame around the notification window. + frame_color = "#7f3fbf" + + # Define a color for the separator. + # possible values are: + # * auto: dunst tries to find a color fitting to the background; + # * foreground: use the same color as the foreground; + # * frame: use the same color as the frame; + # * anything else will be interpreted as a X color. + separator_color = auto + + # Sort messages by urgency. + sort = yes + + # Don't remove messages, if the user is idle (no mouse or keyboard input) + # for longer than idle_threshold seconds. + # Set to 0 to disable. + # A client can set the 'transient' hint to bypass this. See the rules + # section for how to disable this if necessary + idle_threshold = 120 + + ### Text ### + + font = Noto Sans Regular 11 + + # The spacing between lines. If the height is smaller than the + # font height, it will get raised to the font height. + line_height = 0 + + # Possible values are: + # full: Allow a small subset of html markup in notifications: + # bold + # italic + # strikethrough + # underline + # + # For a complete reference see + # . + # + # strip: This setting is provided for compatibility with some broken + # clients that send markup even though it's not enabled on the + # server. Dunst will try to strip the markup but the parsing is + # simplistic so using this option outside of matching rules for + # specific applications *IS GREATLY DISCOURAGED*. + # + # no: Disable markup parsing, incoming notifications will be treated as + # plain text. Dunst will not advertise that it has the body-markup + # capability if this is set as a global setting. + # + # It's important to note that markup inside the format option will be parsed + # regardless of what this is set to. + markup = no + + # The format of the message. Possible variables are: + # %a appname + # %s summary + # %b body + # %i iconname (including its path) + # %I iconname (without its path) + # %p progress value if set ([ 0%] to [100%]) or nothing + # %n progress value if set without any extra characters + # %% Literal % + # Markup is allowed + format = "%s\n%b" + + # Alignment of message text. + # Possible values are "left", "center" and "right". + alignment = left + + # Show age of message if message is older than show_age_threshold + # seconds. + # Set to -1 to disable. + show_age_threshold = 60 + + # Split notifications into multiple lines if they don't fit into + # geometry. + word_wrap = yes + + # When word_wrap is set to no, specify where to make an ellipsis in long lines. + # Possible values are "start", "middle" and "end". + ellipsize = middle + + # Ignore newlines '\n' in notifications. + ignore_newline = no + + # Stack together notifications with the same content + stack_duplicates = true + + # Hide the count of stacked notifications with the same content + hide_duplicate_count = false + + # Display indicators for URLs (U) and actions (A). + show_indicators = yes + + ### Icons ### + + # Align icons left/right/off + icon_position = left + + # Scale larger icons down to this size, set to 0 to disable + max_icon_size = 32 + + # Paths to default icons. + #icon_path = /usr/share/icons/gnome/16x16/status/:/usr/share/icons/gnome/16x16/devices/ + icon_path = /usr/share/icons/Paper/16x16/status/:/usr/share/icons/Paper/16x16/devices/:/usr/share/icons/Paper/16x16/apps/:/usr/share/pixmaps/ + ### History ### + + # Should a notification popped up from history be sticky or timeout + # as if it would normally do. + sticky_history = yes + + # Maximum amount of notifications kept in history + history_length = 20 + + ### Misc/Advanced ### + + # dmenu path. + dmenu = /usr/bin/dmenu -p dunst: + + # Browser for opening urls in context menu. + browser = /usr/bin/firefox -new-tab + + # Always run rule-defined scripts, even if the notification is suppressed + always_run_script = true + + # Define the title of the windows spawned by dunst + title = Dunst + + # Define the class of the windows spawned by dunst + class = Dunst + + # Print a notification on startup. + # This is mainly for error detection, since dbus (re-)starts dunst + # automatically after a crash. + startup_notification = false + + # Manage dunst's desire for talking + # Can be one of the following values: + # crit: Critical features. Dunst aborts + # warn: Only non-fatal warnings + # mesg: Important Messages + # info: all unimportant stuff + # debug: all less than unimportant stuff + verbosity = mesg + + # Define the corner radius of the notification window + # in pixel size. If the radius is 0, you have no rounded + # corners. + # The radius will be automatically lowered if it exceeds half of the + # notification height to avoid clipping text and/or icons. + corner_radius = 3 + + ### Legacy + + # Use the Xinerama extension instead of RandR for multi-monitor support. + # This setting is provided for compatibility with older nVidia drivers that + # do not support RandR and using it on systems that support RandR is highly + # discouraged. + # + # By enabling this setting dunst will not be able to detect when a monitor + # is connected or disconnected which might break follow mode if the screen + # layout changes. + force_xinerama = false + + ### mouse + + # Defines action of mouse event + # Possible values are: + # * none: Don't do anything. + # * do_action: If the notification has exactly one action, or one is marked as default, + # invoke it. If there are multiple and no default, open the context menu. + # * close_current: Close current notification. + # * close_all: Close all notifications. + mouse_left_click = close_current + mouse_middle_click = do_action + mouse_right_click = close_all + +# Experimental features that may or may not work correctly. Do not expect them +# to have a consistent behaviour across releases. +[experimental] + # Calculate the dpi to use on a per-monitor basis. + # If this setting is enabled the Xft.dpi value will be ignored and instead + # dunst will attempt to calculate an appropriate dpi value for each monitor + # using the resolution and physical size. This might be useful in setups + # where there are multiple screens with very different dpi values. + per_monitor_dpi = false + +[shortcuts] + + # Shortcuts are specified as [modifier+][modifier+]...key + # Available modifiers are "ctrl", "mod1" (the alt-key), "mod2", + # "mod3" and "mod4" (windows-key). + # Xev might be helpful to find names for keys. + + # Close notification. + close = ctrl+space + + # Close all notifications. + close_all = ctrl+shift+space + + # Redisplay last message(s). + # On the US keyboard layout "grave" is normally above TAB and left + # of "1". Make sure this key actually exists on your keyboard layout, + # e.g. check output of 'xmodmap -pke' + history = ctrl+grave + + # Context menu. + context = ctrl+shift+period + +[urgency_low] + # IMPORTANT: colors have to be defined in quotation marks. + # Otherwise the "#" and following would be interpreted as a comment. + background = "#28143c" + foreground = "#ffffff" + timeout = 5 + # Icon for notifications with low urgency, uncomment to enable + icon = /usr/share/icons/Arc-X-D/status/16/dialog-information.png + +[urgency_normal] + background = "#28143c" + foreground = "#ffffff" + timeout = 5 + # Icon for notifications with normal urgency, uncomment to enable + icon = /usr/share/icons/Arc-X-D/status/16/dialog-question.png + +[urgency_critical] + background = "#28143c" + foreground = "#ffffff" + frame_color = "#ff7f7f" + timeout = 120 + # Icon for notifications with critical urgency, uncomment to enable + icon = /usr/share/icons/Arc-X-D/status/16/dialog-warning.png + +# Every section that isn't one of the above is interpreted as a rules to +# override settings for certain messages. +# +# Messages can be matched by +# appname (discouraged, see desktop_entry) +# body +# category +# desktop_entry +# icon +# match_transient +# msg_urgency +# stack_tag +# summary +# +# and you can override the +# background +# foreground +# format +# frame_color +# fullscreen +# new_icon +# set_stack_tag +# set_transient +# timeout +# urgency +# +# Shell-like globbing will get expanded. +# +# Instead of the appname filter, it's recommended to use the desktop_entry filter. +# GLib based applications export their desktop-entry name. In comparison to the appname, +# the desktop-entry won't get localized. +# +# SCRIPTING +# You can specify a script that gets run when the rule matches by +# setting the "script" option. +# The script will be called as follows: +# script appname summary body icon urgency +# where urgency can be "LOW", "NORMAL" or "CRITICAL". +# +# NOTE: if you don't want a notification to be displayed, set the format +# to "". +# NOTE: It might be helpful to run dunst -print in a terminal in order +# to find fitting options for rules. + +# Disable the transient hint so that idle_threshold cannot be bypassed from the +# client +#[transient_disable] +# match_transient = yes +# set_transient = no +# +# Make the handling of transient notifications more strict by making them not +# be placed in history. +#[transient_history_ignore] +# match_transient = yes +# history_ignore = yes + +# fullscreen values +# show: show the notifications, regardless if there is a fullscreen window opened +# delay: displays the new notification, if there is no fullscreen window active +# If the notification is already drawn, it won't get undrawn. +# pushback: same as delay, but when switching into fullscreen, the notification will get +# withdrawn from screen again and will get delayed like a new notification +#[fullscreen_delay_everything] +# fullscreen = delay +#[fullscreen_show_critical] +# msg_urgency = critical +# fullscreen = show + +#[espeak] +# summary = "*" +# script = dunst_espeak.sh + +#[script-test] +# summary = "*script*" +# script = dunst_test.sh + +#[ignore] +# # This notification will not be displayed +# summary = "foobar" +# format = "" + +#[history-ignore] +# # This notification will not be saved in history +# summary = "foobar" +# history_ignore = yes + +#[skip-display] +# # This notification will not be displayed, but will be included in the history +# summary = "foobar" +# skip_display = yes + +#[signed_on] +# appname = Pidgin +# summary = "*signed on*" +# urgency = low +# +#[signed_off] +# appname = Pidgin +# summary = *signed off* +# urgency = low +# +#[says] +# appname = Pidgin +# summary = *says* +# urgency = critical +# +#[twitter] +# appname = Pidgin +# summary = *twitter.com* +# urgency = normal +# +#[stack-volumes] +# appname = "some_volume_notifiers" +# set_stack_tag = "volume" +# +# vim: ft=cfg + diff --git a/.config/gtk-3.0/settings.ini b/.config/gtk-3.0/settings.ini new file mode 100644 index 0000000..a195e45 --- /dev/null +++ b/.config/gtk-3.0/settings.ini @@ -0,0 +1,16 @@ +[Settings] +gtk-theme-name=Arc-Dark +gtk-icon-theme-name=Arc-X-D +gtk-font-name=Noto Sans 11 +gtk-cursor-theme-name=capitaine-cursors-light +gtk-cursor-theme-size=0 +gtk-toolbar-style=GTK_TOOLBAR_BOTH_HORIZ +gtk-toolbar-icon-size=GTK_ICON_SIZE_LARGE_TOOLBAR +gtk-button-images=0 +gtk-menu-images=0 +gtk-enable-event-sounds=1 +gtk-enable-input-feedback-sounds=1 +gtk-xft-antialias=1 +gtk-xft-hinting=1 +gtk-xft-hintstyle=hintmedium +gtk-xft-rgba=rgb diff --git a/.config/i3/config b/.config/i3/config new file mode 100644 index 0000000..e3d7b6e --- /dev/null +++ b/.config/i3/config @@ -0,0 +1,341 @@ + +# This file a modified version based by default i3-config-wizard config +# source is available here: +# https://raw.githubusercontent.com/endeavouros-team/i3-EndeavourOS/master/.config/i3/config +# Maintainer: joekamprad [joekamprad@endeavouros.com] +# Visual Designer: Florent Valetti @FLVAL EndeavourOS +# https://endeavouros.com +# +# --> to update this run the following command: +# wget --backups=1 https://raw.githubusercontent.com/endeavouros-team/i3-EndeavourOS/master/.config/i3/config -P ~/.config/i3/ + +# Endeavouros-i3 config file +# Source for complete framework of our i3 config and theming here: https://github.com/endeavouros-team/i3-EndeavourOS +# EndeavourOS wiki holds some Information also: https://endeavouros.com/docs/window-tiling-managers/i3-wm/ +# Please see http://i3wm.org/docs/userguide.html for the official i3 reference! + +####################### +# config starts here: # +####################### + +# Font for window titles. Will also be used by the bar unless a different font +# is used in the bar {} block below. +# This font is widely installed, provides lots of unicode glyphs, right-to-left +# text rendering and scalability on retina/hidpi displays (thanks to pango). +font pango:Noto Sans Regular 11, FontAwesome 11 + +# set the mod key to the winkey: +set $mod Mod4 + +##################### +# workspace layout: # +##################### + +# default i3 tiling mode: +workspace_layout default + +# i3 stacking layout: +# Each window will be fullscreen and tabbed top to bottom. +#workspace_layout stacking + +# i3 tabbed layout: +# Each new window will open fullscreen as a tab (left to right) +#workspace_layout tabbed + +############################## +# extra options for windows: # +############################## + +#do not show titlebar on windows: +new_window none + +# thin borders +hide_edge_borders both + +# Set inner/outer gaps +gaps inner 2 +gaps outer 0 + + +# Use Mouse+$mod to drag floating windows to their wanted position +floating_modifier $mod + +# switch to workspace +bindsym $mod+1 workspace $ws1 +bindsym $mod+2 workspace $ws2 +bindsym $mod+3 workspace $ws3 +bindsym $mod+4 workspace $ws4 +bindsym $mod+5 workspace $ws5 +bindsym $mod+6 workspace $ws6 + +# move focused container to workspace +bindsym $mod+Shift+1 move container to workspace $ws1 +bindsym $mod+Shift+2 move container to workspace $ws2 +bindsym $mod+Shift+3 move container to workspace $ws3 +bindsym $mod+Shift+4 move container to workspace $ws4 +bindsym $mod+Shift+5 move container to workspace $ws5 +bindsym $mod+Shift+6 move container to workspace $ws6 + +###################################### +# keybindings for different actions: # +###################################### + +# start a terminal +bindsym $mod+Return exec xfce4-terminal + +# kill focused window +bindsym $mod+c kill + +# exit-menu +bindsym $mod+Shift+e exec ~/.config/i3/scripts/shutdown_menu -p rofi -c + +# Lock the system +# lock with a picture: +#bindsym $mod+l exec i3lock -i ~/.config/i3/i3-lock-screen.png -p default|win -t +# lock by blurring the screen: +bindsym $mod+l exec ~/.config/i3/scripts/blur-lock.sh + +# reload the configuration file +bindsym $mod+Shift+c reload + +# restart i3 inplace (preserves your layout/session, can be used to upgrade i3) +bindsym $mod+Shift+r restart + +# keybinding list in editor: +bindsym $mod+F1 exec xed ~/.config/i3/keybindings + +# change focus +bindsym $mod+j focus left +bindsym $mod+k focus down +bindsym $mod+b focus up +bindsym $mod+o focus right + +# alternatively, you can use the cursor keys: +bindsym $mod+Left focus left +bindsym $mod+Down focus down +bindsym $mod+Up focus up +bindsym $mod+Right focus right + +# move focused window +bindsym $mod+Shift+j move left +bindsym $mod+Shift+k move down +bindsym $mod+Shift+b move up +bindsym $mod+Shift+o move right + +# alternatively, you can use the cursor keys: +bindsym $mod+Shift+Left move left +bindsym $mod+Shift+Down move down +bindsym $mod+Shift+Up move up +bindsym $mod+Shift+Right move right + +# split in horizontal orientation +bindsym $mod+h split h + +# split in vertical orientation +bindsym $mod+v split v + +# enter fullscreen mode for the focused container +bindsym $mod+f fullscreen toggle + +# change container layout (stacked, tabbed, toggle split) +bindsym $mod+s layout stacking +bindsym $mod+g layout tabbed +bindsym $mod+e layout toggle split + +# toggle tiling / floating +bindsym $mod+Shift+space floating toggle + +# change focus between tiling / floating windows +bindsym $mod+space focus mode_toggle + +# focus the parent container +bindsym $mod+a focus parent + +# focus the child container +#bindsym $mod+d focus child + +## Multimedia Keys + +# volume +bindsym XF86AudioRaiseVolume exec amixer -D pulse sset Master 5%+ && pkill -RTMIN+1 i3blocks +bindsym XF86AudioLowerVolume exec amixer -D pulse sset Master 5%- && pkill -RTMIN+1 i3blocks + +# gradular volume control +bindsym $mod+XF86AudioRaiseVolume exec amixer -D pulse sset Master 1%+ && pkill -RTMIN+1 i3blocks +bindsym $mod+XF86AudioLowerVolume exec amixer -D pulse sset Master 1%- && pkill -RTMIN+1 i3blocks + +# mute +bindsym XF86AudioMute exec amixer sset Master toggle && killall -USR1 i3blocks + +bindsym XF86AudioPlay exec playerctl play +bindsym XF86AudioPause exec playerctl pause +bindsym XF86AudioNext exec playerctl next +bindsym XF86AudioPrev exec playerctl previous + +# Redirect sound to headphones +bindsym $mod+p exec /usr/local/bin/switch-audio-port + +## App shortcuts +bindsym $mod+w exec /usr/bin/firefox +bindsym $mod+n exec /usr/bin/thunar +bindsym Print exec "scrot ~/%Y-%m-%d-%T-screenshot.png" + +########################################## +# configuration for workspace behaviour: # +########################################## + +# Define names for default workspaces for which we configure key bindings later on. +# We use variables to avoid repeating the names in multiple places. +set $ws1 "" +set $ws2 "" +set $ws3 "" +set $ws4 "" +set $ws5 "" + +# bind program to workspace and focus to them on startup: +assign [class="Xfce4-terminal"] $ws1 +assign [class="(?i)firefox"] $ws2 +assign [class="Thunar"] $ws3 +assign [class="Thunderbird"] $ws4 +assign [class="TelegramDesktop"] $ws5 + + +# automatic set focus new window if it opens on another workspace then the current: +for_window [class=Xfce4-terminal] focus +#for_window [class=(?i)firefox] focus +#for_window [class=Thunar] focus +#for_window [class=Thunderbird] focus +#for_window [class=TelegramDesktop] focus + +############################################ +#autostart applications/services on login: # +############################################ + +#get auth work with polkit-gnome +exec --no-startup-id /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1 + +# dex execute .desktop files +exec --no-startup-id dex -a -s /etc/xdg/autostart/:~/.config/autostart/ + +# num lock activated +#exec --no-startup-id numlockx on + +# start conky: +#exec_always --no-startup-id conky + +# start a script to setup displays +# uncomment the next line, use arandr to setup displays and save the file as monitor: +#exec --no-startup-id ~/.screenlayout/monitor.sh + +# start blueberry app for managing bluetooth devices from tray: +exec --no-startup-id blueberry-tray + +#transparency +#exec --no-startup-id xcompmgr -c -C -t-5 -l-5 -r4.2 -o.55 & +exec --no-startup-id picom -CGb + +#networkmanager-applet +exec --no-startup-id nm-applet + +# set wallpaper +#exec --no-startup-id nitrogen --restore +exec --no-startup-id feh --bg-fill ~/.config/i3/eos-i3_4096x2304_001.png + +#set powersavings for display: +exec --no-startup-id xset s 480 dpms 600 600 600 + +# Desktop notifications +exec --no-startup-id dbus-launch dunst --config ~/.config/dunst/dunstrc + +# Autostart apps as you like +#exec --no-startup-id sleep 2 && xfce4-terminal +#exec --no-startup-id firefox +#exec --no-startup-id sleep 3 && thunar + +# set floating (nontiling)for apps needing it +for_window [class="Yad" instance="yad"] floating enable +for_window [class="Galculator" instance="galculator"] floating enable +for_window [class="Blueberry.py" instance="blueberry.py"] floating enable + +#set floating (nontiling) for special apps +for_window [class="Xsane" instance="xsane"] floating enable +for_window [class="Pavucontrol" instance="pavucontrol"] floating enable +for_window [class="qt5ct" instance="qt5ct"] floating enable +for_window [class="Blueberry.py" instance="blueberry.py"] floating enable +for_window [class="Bluetooth-sendto" instance="bluetooth-sendto"] floating enable +for_window [class="Pamac-manager"] floating enable + +###################################### +# color settings for bar and windows # +###################################### + +# Define colors variables: +set $darkbluetrans #08052be6 +set $darkblue #08052b +set $lightblue #5556ff +set $urgentred #e53935 +set $white #ffffff +set $black #000000 +set $purple #e345ff +set $darkgrey #333333 +set $grey #999999 +set $mediumgrey #8b8b8b +set $yellowbrown #e1b700 + +# define colors for windows: +#class border bground text indicator child_border +client.focused $lightblue $darkblue $white $purple $mediumgrey +client.unfocused $darkblue $darkblue $grey $purple $darkgrey +client.focused_inactive $darkblue $darkblue $grey $purple $black +client.urgent $urgentred $urgentred $white $purple $yellowbrown + + +############################################ +# bar settings (imput comes from i3blocks) # +############################################ + +# Start i3bar to display a workspace bar +# (plus the system information i3status finds out, if available) +bar { + font pango:Noto Sans Regular 11 + status_command i3blocks -c ~/.config/i3/i3blocks.conf + position bottom +# i3bar_command i3bar --transparency + tray_output primary + tray_padding 0 + colors { + separator $purple + background $darkbluetrans + statusline $white +# border bg txt indicator + focused_workspace $grey $grey $darkblue $purple + active_workspace $mediumgrey $mediumgrey $darkblue $purple + inactive_workspace $darkblue $darkblue $grey $purple + urgent_workspace $urgentred $urgentred $white $purple +} +} + +##################################### +# Application menu handled by rofi: # +##################################### + +## rofi bindings fancy application menu (two bindings F9/$mod+i) + +bindsym $mod+i exec rofi -modi drun -show drun -display-drun "Apps : " -line-padding 4 \ + -columns 2 -padding 50 -hide-scrollbar \ + -show-icons -drun-icon-theme "Arc-X-D" -font "Noto Sans Regular 11" + +bindsym F9 exec rofi -modi drun -show drun -display-drun "Apps : " -line-padding 4 \ + -columns 2 -padding 30 -hide-scrollbar \ + -show-icons -drun-icon-theme "Arc-X-D" -font "Noto Sans Regular 11" + +## rofi bindings for window menu (two bindings F10/$mod+t) + +bindsym $mod+t exec rofi -show window -display-window "Window : " -line-padding 4 \ + -lines 10 -padding 50 -hide-scrollbar \ + -show-icons -drun-icon-theme "Arc-X-D" -font "Noto Sans Regular 11" + +bindsym F10 exec rofi -show window -display-window "Window : " -line-padding 4 \ + -lines 10 -padding 50 -hide-scrollbar \ + -show-icons -drun-icon-theme "Arc-X-D" -font "Noto Sans Regular 11" + diff --git a/.config/i3/endeavouros-default-config b/.config/i3/endeavouros-default-config new file mode 100644 index 0000000..32295a8 --- /dev/null +++ b/.config/i3/endeavouros-default-config @@ -0,0 +1,324 @@ + +# This file a modified version based by default i3-config-wizard config +# source is available here: +# https://raw.githubusercontent.com/endeavouros-team/i3-EndeavourOS/master/.config/i3/config +# Maintainer: joekamprad [joekamprad@endeavouros.com] +# Visual Designer: Florent Valetti @FLVAL EndeavourOS +# https://endeavouros.com +# +# --> to update this run the following command: +# wget --backups=1 https://raw.githubusercontent.com/endeavouros-team/i3-EndeavourOS/master/.config/i3/config -P ~/.config/i3/ + +# Endeavouros-i3 config file +# Source for complete framework of our i3 config and theming here: https://github.com/endeavouros-team/i3-EndeavourOS +# EndeavourOS wiki holds some Information also: https://endeavouros.com/docs/window-tiling-managers/i3-wm/ +# Please see http://i3wm.org/docs/userguide.html for the official i3 reference! + +####################### +# config starts here: # +####################### + +# Font for window titles. Will also be used by the bar unless a different font +# is used in the bar {} block below. +# This font is widely installed, provides lots of unicode glyphs, right-to-left +# text rendering and scalability on retina/hidpi displays (thanks to pango). +font pango:Noto Sans Regular 11, FontAwesome 11 + +# set the mod key to the winkey: +set $mod Mod4 + +##################### +# workspace layout: # +##################### + +# default i3 tiling mode: +workspace_layout default + +# i3 stacking layout: +# Each window will be fullscreen and tabbed top to bottom. +#workspace_layout stacking + +# i3 tabbed layout: +# Each new window will open fullscreen as a tab (left to right) +#workspace_layout tabbed + +############################## +# extra options for windows: # +############################## + +#do not show titlebar on windows: +new_window none + +# thin borders +hide_edge_borders both + +# Set inner/outer gaps +gaps inner 2 +gaps outer 0 + + +# Use Mouse+$mod to drag floating windows to their wanted position +floating_modifier $mod + +###################################### +# keybindings for different actions: # +###################################### + +# start a terminal +bindsym $mod+Return exec xfce4-terminal + +# kill focused window +bindsym $mod+c kill + +# exit-menu +bindsym $mod+Shift+e exec ~/.config/i3/scripts/shutdown_menu -p rofi -c + +# Lock the system +# lock with a picture: +bindsym $mod+l exec convert -resize $(xdpyinfo | grep dimensions | cut -d\ -f7 | cut -dx -f1) ~/.config/i3/lock-screen.png ~/.config/i3/i3-lock-screen.png && i3lock -i ~/.config/i3/i3-lock-screen.png -p default|win -t +# lock by blurring the screen: +#bindsym $mod+l exec ~/.config/i3/scripts/blur-lock.sh + +# reload the configuration file +bindsym $mod+Shift+c reload + +# restart i3 inplace (preserves your layout/session, can be used to upgrade i3) +bindsym $mod+Shift+r restart + +# change focus +bindsym $mod+j focus left +bindsym $mod+k focus down +bindsym $mod+b focus up +bindsym $mod+o focus right + +# alternatively, you can use the cursor keys: +bindsym $mod+Left focus left +bindsym $mod+Down focus down +bindsym $mod+Up focus up +bindsym $mod+Right focus right + +# move focused window +bindsym $mod+Shift+j move left +bindsym $mod+Shift+k move down +bindsym $mod+Shift+b move up +bindsym $mod+Shift+o move right + +# alternatively, you can use the cursor keys: +bindsym $mod+Shift+Left move left +bindsym $mod+Shift+Down move down +bindsym $mod+Shift+Up move up +bindsym $mod+Shift+Right move right + +# split in horizontal orientation +bindsym $mod+h split h + +# split in vertical orientation +bindsym $mod+v split v + +# enter fullscreen mode for the focused container +bindsym $mod+f fullscreen toggle + +# change container layout (stacked, tabbed, toggle split) +bindsym $mod+s layout stacking +bindsym $mod+g layout tabbed +bindsym $mod+e layout toggle split + +# toggle tiling / floating +bindsym $mod+Shift+space floating toggle + +# change focus between tiling / floating windows +bindsym $mod+space focus mode_toggle + +# focus the parent container +bindsym $mod+a focus parent + +# focus the child container +#bindsym $mod+d focus child + +## Multimedia Keys + +# volume +bindsym XF86AudioRaiseVolume exec amixer -D pulse sset Master 5%+ && pkill -RTMIN+1 i3blocks +bindsym XF86AudioLowerVolume exec amixer -D pulse sset Master 5%- && pkill -RTMIN+1 i3blocks + +# gradular volume control +bindsym $mod+XF86AudioRaiseVolume exec amixer -D pulse sset Master 1%+ && pkill -RTMIN+1 i3blocks +bindsym $mod+XF86AudioLowerVolume exec amixer -D pulse sset Master 1%- && pkill -RTMIN+1 i3blocks + +# mute +bindsym XF86AudioMute exec amixer sset Master toggle && killall -USR1 i3blocks + +bindsym XF86AudioPlay exec playerctl play +bindsym XF86AudioPause exec playerctl pause +bindsym XF86AudioNext exec playerctl next +bindsym XF86AudioPrev exec playerctl previous + +## App shortcuts +bindsym $mod+w exec /usr/bin/firefox +bindsym $mod+n exec /usr/bin/thunar +bindsym Print exec "scrot ~/%Y-%m-%d-%T-screenshot.png" + +# Redirect sound to headphones +bindsym $mod+p exec /usr/local/bin/switch-audio-port + +########################################## +# configuration for workspace behaviour: # +########################################## + +# Define names for default workspaces for which we configure key bindings later on. +# We use variables to avoid repeating the names in multiple places. +set $ws1 "" +set $ws2 "" +set $ws3 "" +set $ws4 "" +set $ws5 "" + +# bind program to workspace and focus to them on startup: +assign [class="Xfce4-terminal"] $ws1 +assign [class="(?i)firefox"] $ws2 +assign [class="Thunar"] $ws3 +assign [class="Thunderbird"] $ws4 +assign [class="TelegramDesktop"] $ws5 + + +# automatic set focus new window if it opens on another workspace then the current: +for_window [class=Xfce4-terminal] focus +#for_window [class=(?i)firefox] focus +#for_window [class=Thunar] focus +#for_window [class=Thunderbird] focus +#for_window [class=TelegramDesktop] focus + +## show windowbar for yad apps: +for_window [class="Yad"] border toggle + +############################################ +#autostart applications/services on login: # +############################################ + +#get auth work with polkit-gnome +exec --no-startup-id /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1 + +# dex execute .desktop files +exec --no-startup-id dex -a -s /etc/xdg/autostart/:~/.config/autostart/ + +# num lock activated +#exec --no-startup-id numlockx on + +# start conky: +#exec_always --no-startup-id conky + +# start a script to setup displays +# uncomment the next line, use arandr to setup displays and save the file as monitor: +exec --no-startup-id ~/.screenlayout/monitor.sh + +# start blueberry app for managing bluetooth devices from tray: +exec --no-startup-id blueberry-tray + +#transparency +#exec --no-startup-id xcompmgr -c -C -t-5 -l-5 -r4.2 -o.55 & +exec --no-startup-id picom -CGb + +#networkmanager-applet +exec --no-startup-id nm-applet + +# set wallpaper +exec --no-startup-id nitrogen --restore +#exec --no-startup-id feh --bg-fill /usr/share/endeavouros/backgrounds/enos-i3_4096x2304_001.png + +#set powersavings for display: +exec --no-startup-id xset s 480 dpms 600 600 600 + +# Desktop notifications +exec --no-startup-id dbus-launch dunst --config ~/.config/dunst/dunstrc + +# Autostart apps as you like +#exec --no-startup-id sleep 2 && xfce4-terminal +#exec --no-startup-id firefox +#exec --no-startup-id sleep 3 && thunar + +# set floating (nontiling)for apps needing it +for_window [class="Yad" instance="yad"] floating enable +for_window [class="Galculator" instance="galculator"] floating enable +for_window [class="Blueberry.py" instance="blueberry.py"] floating enable + +#set floating (nontiling) for special apps +for_window [class="Xsane" instance="xsane"] floating enable +for_window [class="Pavucontrol" instance="pavucontrol"] floating enable +for_window [class="qt5ct" instance="qt5ct"] floating enable +for_window [class="Blueberry.py" instance="blueberry.py"] floating enable +for_window [class="Bluetooth-sendto" instance="bluetooth-sendto"] floating enable +for_window [class="Pamac-manager"] floating enable + +###################################### +# color settings for bar and windows # +###################################### + +# Define colors variables: +set $darkbluetrans #001b33e6 +set $darkblue #001b33 +set $lightdblue #5556ff +set $urgentred #e53935 +set $white #ffffff +set $purple #e345ff +set $darkgrey #333333 +set $glowingbluetrans #17056000 +set $grey #a1a1a1 +set $mediumgrey #8b8b8b +set $yellowbrown #e1b700 + +# define colors for windows: +#class border bground text indicator child_border +client.focused $lightdblue $darkblue $white $purple $white +client.unfocused $darkblue $darkblue $grey $purple $mediumgrey +client.focused_inactive $darkblue $darkblue $grey $purple $mediumgrey +client.urgent $urgentred $urgentred $white $purple $yellowbrown + + +############################################ +# bar settings (imput comes from i3blocks) # +############################################ + +# Start i3bar to display a workspace bar +# (plus the system information i3status finds out, if available) +bar { + font pango:Noto Sans Regular 10 + status_command i3blocks -c ~/.config/i3/i3blocks.conf + position bottom + i3bar_command i3bar --transparency + tray_output primary + colors { + separator $purple + background $darkbluetrans + statusline $white +# border bg txt indicator + focused_workspace $lightdblue $lightdblue $darkblue $purple + active_workspace $lightdblue $lightdblue $darkblue $purple + inactive_workspace $darkblue $darkblue $lightdblue $purple + urgent_workspace $urgentred $urgentred $white $purple +} +} + +##################################### +# Application menu handled by rofi: # +##################################### + +## rofi bindings fancy application menu (two bindings F9/$mod+i) + +bindsym $mod+i exec rofi -modi drun -show drun -display-drun "apps " -line-padding 4 \ + -columns 2 -padding 50 -hide-scrollbar \ + -show-icons -drun-icon-theme "Arc-X-D" -font "Noto Sans Regular 11" + +bindsym F9 exec rofi -modi drun -show drun -display-drun "apps " -line-padding 4 \ + -columns 2 -padding 30 -hide-scrollbar \ + -show-icons -drun-icon-theme "Arc-X-D" -font "Noto Sans Regular 11" + +## rofi bindings for window menu (two bindings F10/$mod+t) + +bindsym $mod+t exec rofi -show window -line-padding 4 \ + -lines 10 -padding 50 -hide-scrollbar \ + -show-icons -drun-icon-theme "Arc-X-D" -font "Noto Sans Regular 11" + +bindsym F10 exec rofi -show window -line-padding 4 \ + -lines 10 -padding 50 -hide-scrollbar \ + -show-icons -drun-icon-theme "Arc-X-D" -font "Noto Sans Regular 11" + diff --git a/.config/i3/eos-i3_4096x2304_001.png b/.config/i3/eos-i3_4096x2304_001.png new file mode 100644 index 0000000..91484ac Binary files /dev/null and b/.config/i3/eos-i3_4096x2304_001.png differ diff --git a/.config/i3/i3blocks.conf b/.config/i3/i3blocks.conf new file mode 100644 index 0000000..b3f2668 --- /dev/null +++ b/.config/i3/i3blocks.conf @@ -0,0 +1,142 @@ +# i3blocks config file changed for EndeavourOS-i3 setup + +# source is available here: +# https://raw.githubusercontent.com/endeavouros-team/i3-EndeavourOS/master/.config/i3/i3blocks.conf +# Maintainer: joekamprad [joekamprad@endeavouros.com] +# Visual Designer: Florent Valetti [@FLVAL EndeavourOS] +# created for i3wm setup on EndeavourOS +# https://endeavouros.com + +# cheatsheet for icon fonts used on the block-bar: +# https://fontawesome.com/icons?d=gallery&m=free + +# Please see man i3blocks for a complete reference! +# The man page is also hosted at http://vivien.github.io/i3blocks + + +# List of valid properties: +# +# align +# color +# command +# full_text +# instance +# interval +# label +# min_width +# name +# separator +# separator_block_width +# short_text +# signal +# urgent + +# Global properties +# +# The top properties below are applied to every block, but can be overridden. +separator=false +markup=pango + +[browser] +full_text=  +color=#ff7f81 +command=firefox + +[files] +full_text=  +color=#7f3fbf +command=thunar ~/ + +[terminal] +full_text=  +color=#807dfe +command=xfce4-terminal + +#[mail] +#full_text=  +#color=#dbcb75 +#command=thunderbird + +[simple-2] +full_text=: : +color=#717171 + +# Disk usage +# +# The directory defaults to $HOME if the instance is not specified. +# The script may be called with a optional argument to set the alert +# (defaults to 10 for 10%). +[disk] +label= +instance=/ +command=~/.config/i3/scripts/disk +interval=30 + +# Memory usage +# +# The type defaults to "mem" if the instance is not specified. +[memory] +label= +command=~/.config/i3/scripts/memory +interval=2 + +[cpu_usage] +label= +command=~/.config/i3/scripts/cpu_usage +#min_width=CPU: 100.00% +interval=2 + +[CPU-temperature] +label= +command=~/.config/i3/scripts/temperature +interval=30 + +# showing name of connected network (enable for wifi use) +#[net] +#label= +#command=echo "$(LANG=C nmcli d | grep connected | awk '{print $4}')" +#interval=30 + +[bandwidth] +command=~/.config/i3/scripts/bandwidth2 +interval=persist + +# Battery indicator +# +# The battery instance defaults to 0. +[battery] +command=~/.config/i3/scripts/battery.sh +# change this to battery-pinebook-pro.sh if you are running on pinebook-pro +label= +#instance=1 +interval=30 + +[simple-2] +full_text=: : +color=#717171 + +[pavucontrol] +full_text= +command=pavucontrol + +[volume-pulseaudio] +command=~/.config/i3/scripts/volume +instance=Master +interval=1 + +[keybindings] +full_text= +command=~/.config/i3/scripts/keyhint.sh + +[time] +#label= +command=date '+%a %d %b %H:%M:%S' +interval=1 + +[shutdown_menu] +full_text= +command=~/.config/i3/scripts/shutdown_menu -p rofi -c; + +[simple-2] +full_text=: : +color=#717171 diff --git a/.config/i3/keybindings b/.config/i3/keybindings new file mode 100644 index 0000000..7ed376b --- /dev/null +++ b/.config/i3/keybindings @@ -0,0 +1,100 @@ +EndeavourOS i3wm Keybindings cheat sheet: + +--> to update this run the following command: +wget --backups=1 https://raw.githubusercontent.com/endeavouros-team/i3-EndeavourOS/master/.config/i3/keybindings -P ~/.config/i3/ + +All sources and updates are available at GitHub: +https://github.com/endeavouros-team/i3-EndeavourOS + +For reference consult our WIKI: +https://endeavouros.com/docs/window-tiling-managers/i3-wm/ + + = windows key + +# start xfce4-terminal ++Return + +# kill focused window ++c + +# Application menu search by typing (fancy Rofi menu): +F9 or +i + +# Window switcher menu (fancy Rofu menu): +F10 or +t + +# fancy exit-menu on bottom right: ++Shift+e + +# Lock the system +# lock with a picture or blurring the screen (options in config) ++l + +# reload the configuration file ++Shift+c + +# restart i3 inplace (preserves your layout/session, can be used to upgrade i3) ++Shift+r + +# full keybinding list in editor: ++F1 + +# change window focus ++j focus left ++k focus down ++b focus up ++o focus right + +# alternatively, you can use the cursor keys: ++Left focus left ++Down focus down ++Up focus up ++Right focus right + +# move a focused window ++Shift+j move left ++Shift+k move down ++Shift+b move up ++Shift+o move right + +# alternatively, you can use the cursor keys: ++Shift+Left move left ++Shift+Down move down ++Shift+Up move up ++Shift+Right move right + +# split in horizontal orientation ++h split h + +# split in vertical orientation ++v split v + +# enter fullscreen mode for the focused container ++f fullscreen toggle + +# change container layout (stacked, tabbed, toggle split) ++s layout stacking ++g layout tabbed ++e layout toggle split + +# toggle tiling / floating ++Shift+space floating toggle + +# change focus between tiling / floating windows ++space focus mode_toggle + +# focus the parent container ++a focus parent + +# focus the child container +#+d focus child + +## Multimedia Keys + +# Redirect sound to headphones ++p + +## App shortcuts ++w starts Firefox ++n starts Thunar +Print Button screenshot diff --git a/.config/i3/lock-screen.png b/.config/i3/lock-screen.png new file mode 100644 index 0000000..0277b33 Binary files /dev/null and b/.config/i3/lock-screen.png differ diff --git a/.config/i3/scripts/bandwidth2 b/.config/i3/scripts/bandwidth2 new file mode 100644 index 0000000..d363856 --- /dev/null +++ b/.config/i3/scripts/bandwidth2 @@ -0,0 +1,104 @@ +#!/usr/bin/env bash +# +# Copyright (C) 2015 James Murphy +# Licensed under the terms of the GNU GPL v2 only. +# +# i3blocks blocklet script to monitor bandwidth usage + +iface="${BLOCK_INSTANCE}" +iface="${IFACE:-$iface}" +dt="${DT:-3}" +unit="${UNIT:-MB}" +LABEL="${LABEL:-}" # down arrow up arrow +printf_command="${PRINTF_COMMAND:-"printf \"${LABEL}%1.0f/%1.0f %s/s\\n\", rx, wx, unit;"}" + +function default_interface { + ip route | awk '/^default via/ {print $5; exit}' +} + +function check_proc_net_dev { + if [ ! -f "/proc/net/dev" ]; then + echo "/proc/net/dev not found" + exit 1 + fi +} + +function list_interfaces { + check_proc_net_dev + echo "Interfaces in /proc/net/dev:" + grep -o "^[^:]\\+:" /proc/net/dev | tr -d " :" +} + +while getopts i:t:u:p:lh opt; do + case "$opt" in + i) iface="$OPTARG" ;; + t) dt="$OPTARG" ;; + u) unit="$OPTARG" ;; + p) printf_command="$OPTARG" ;; + l) list_interfaces && exit 0 ;; + h) printf \ +"Usage: bandwidth3 [-i interface] [-t time] [-u unit] [-p printf_command] [-l] [-h] +Options: +-i\tNetwork interface to measure. Default determined using \`ip route\`. +-t\tTime interval in seconds between measurements. Default: 3 +-u\tUnits to measure bytes in. Default: Mb +\tAllowed units: Kb, KB, Mb, MB, Gb, GB, Tb, TB +\tUnits may have optional it/its/yte/ytes on the end, e.g. Mbits, KByte +-p\tAwk command to be called after a measurement is made. +\tDefault: printf \"%%-5.1f/%%5.1f %%s/s\\\\n\", rx, wx, unit; +\tExposed variables: rx, wx, tx, unit, iface +-l\tList available interfaces in /proc/net/dev +-h\tShow this help text +" && exit 0;; + esac +done + +check_proc_net_dev + +iface="${iface:-$(default_interface)}" +while [ -z "$iface" ]; do + echo No default interface + sleep "$dt" + iface=$(default_interface) +done + +case "$unit" in + Kb|Kbit|Kbits) bytes_per_unit=$((1024 / 8));; + KB|KByte|KBytes) bytes_per_unit=$((1024));; + Mb|Mbit|Mbits) bytes_per_unit=$((1024 * 1024 / 8));; + MB|MByte|MBytes) bytes_per_unit=$((1024 * 1024));; + Gb|Gbit|Gbits) bytes_per_unit=$((1024 * 1024 * 1024 / 8));; + GB|GByte|GBytes) bytes_per_unit=$((1024 * 1024 * 1024));; + Tb|Tbit|Tbits) bytes_per_unit=$((1024 * 1024 * 1024 * 1024 / 8));; + TB|TByte|TBytes) bytes_per_unit=$((1024 * 1024 * 1024 * 1024));; + *) echo Bad unit "$unit" && exit 1;; +esac + +scalar=$((bytes_per_unit * dt)) +init_line=$(cat /proc/net/dev | grep "^[ ]*$iface:") +if [ -z "$init_line" ]; then + echo Interface not found in /proc/net/dev: "$iface" + exit 1 +fi + +init_received=$(awk '{print $2}' <<< $init_line) +init_sent=$(awk '{print $10}' <<< $init_line) + +(while true; do cat /proc/net/dev; sleep "$dt"; done) |\ + stdbuf -oL grep "^[ ]*$iface:" |\ + awk -v scalar="$scalar" -v unit="$unit" -v iface="$iface" ' +BEGIN{old_received='"$init_received"';old_sent='"$init_sent"'} +{ + received=$2 + sent=$10 + rx=(received-old_received)/scalar; + wx=(sent-old_sent)/scalar; + tx=rx+wr; + old_received=received; + old_sent=sent; + if(rx >= 0 && wx >= 0){ + '"$printf_command"'; + fflush(stdout); + } +} +' diff --git a/.config/i3/scripts/battery-pinebook-pro.sh b/.config/i3/scripts/battery-pinebook-pro.sh new file mode 100644 index 0000000..142b31f --- /dev/null +++ b/.config/i3/scripts/battery-pinebook-pro.sh @@ -0,0 +1,18 @@ +#!/bin/bash +#simple Shellscript for i3blocks on Pinebook pro +#05012020 geri123@gmx.net Gerhard S. +#battery-symbols: on Manjaro you need the awesome-terminal-fonts package installed! +PERCENT=$(cat /sys/class/power_supply/cw2015-battery/capacity) +STATUS=$(cat /sys/class/power_supply/cw2015-battery/status) +case $(( + $PERCENT >= 0 && $PERCENT <= 20 ? 1 : + $PERCENT > 20 && $PERCENT <= 40 ? 2 : + $PERCENT > 40 && $PERCENT <= 60 ? 3 : + $PERCENT > 60 && $PERCENT <= 80 ? 4 : 5)) in +# + (1) echo $STATUS:"" :$PERCENT%;; + (2) echo $STATUS:"" :$PERCENT%;; + (3) echo $STATUS:"" :$PERCENT%;; + (4) echo $STATUS:"" :$PERCENT%;; + (5) echo $STATUS:"" :$PERCENT%;; +esac diff --git a/.config/i3/scripts/battery.sh b/.config/i3/scripts/battery.sh new file mode 100644 index 0000000..d36acae --- /dev/null +++ b/.config/i3/scripts/battery.sh @@ -0,0 +1,89 @@ +#!/usr/bin/perl +# +# Copyright 2014 Pierre Mavro +# Copyright 2014 Vivien Didelot +# +# Licensed under the terms of the GNU GPL v3, or any later version. +# +# This script is meant to use with i3blocks. It parses the output of the "acpi" +# command (often provided by a package of the same name) to read the status of +# the battery, and eventually its remaining time (to full charge or discharge). +# +# The color will gradually change for a percentage below 85%, and the urgency +# (exit code 33) is set if there is less that 5% remaining. + +use strict; +use warnings; +use utf8; + +my $acpi; +my $status; +my $percent; +my $ac_adapt; +my $full_text; +my $short_text; +my $bat_number = $ENV{BLOCK_INSTANCE} || 0; + +# read the first line of the "acpi" command output +open (ACPI, "acpi -b | grep 'Battery $bat_number' |") or die; +$acpi = ; +close(ACPI); + +# fail on unexpected output +if ($acpi !~ /: (\w+), (\d+)%/) { + die "$acpi\n"; +} + +$status = $1; +$percent = $2; +$full_text = "$percent%"; + +if ($status eq 'Discharging') { + $full_text .= ' DIS'; +} elsif ($status eq 'Charging') { + $full_text .= ' CHR'; +} elsif ($status eq 'Unknown') { + open (AC_ADAPTER, "acpi -a |") or die; + $ac_adapt = ; + close(AC_ADAPTER); + + if ($ac_adapt =~ /: ([\w-]+)/) { + $ac_adapt = $1; + + if ($ac_adapt eq 'on-line') { + $full_text .= ' CHR'; + } elsif ($ac_adapt eq 'off-line') { + $full_text .= ' DIS'; + } + } +} + +$short_text = $full_text; + +if ($acpi =~ /(\d\d:\d\d):/) { + $full_text .= " ($1)"; +} + +# print text +print "$full_text\n"; +print "$short_text\n"; + +# consider color and urgent flag only on discharge +if ($status eq 'Discharging') { + + if ($percent < 20) { + print "#FF0000\n"; + } elsif ($percent < 40) { + print "#FFAE00\n"; + } elsif ($percent < 60) { + print "#FFF600\n"; + } elsif ($percent < 85) { + print "#A8FF00\n"; + } + + if ($percent < 5) { + exit(33); + } +} + +exit(0); diff --git a/.config/i3/scripts/blur-lock.sh b/.config/i3/scripts/blur-lock.sh new file mode 100644 index 0000000..ae2780b --- /dev/null +++ b/.config/i3/scripts/blur-lock.sh @@ -0,0 +1,11 @@ +#!/bin/bash + +PICTURE=/tmp/i3lock.png +SCREENSHOT="scrot $PICTURE" + +BLUR="5x4" + +$SCREENSHOT +convert $PICTURE -blur $BLUR $PICTURE +i3lock -i $PICTURE +rm $PICTURE diff --git a/.config/i3/scripts/cpu_usage b/.config/i3/scripts/cpu_usage new file mode 100644 index 0000000..d12e5d6 --- /dev/null +++ b/.config/i3/scripts/cpu_usage @@ -0,0 +1,62 @@ +#!/usr/bin/perl +# +# Copyright 2014 Pierre Mavro +# Copyright 2014 Vivien Didelot +# Copyright 2014 Andreas Guldstrand +# +# Licensed under the terms of the GNU GPL v3, or any later version. + +use strict; +use warnings; +use utf8; +use Getopt::Long; + +# default values +my $t_warn = $ENV{T_WARN} // 50; +my $t_crit = $ENV{T_CRIT} // 80; +my $cpu_usage = -1; +my $decimals = $ENV{DECIMALS} // 0; +my $label = $ENV{LABEL} // ""; + +sub help { + print "Usage: cpu_usage [-w ] [-c ] [-d ]\n"; + print "-w : warning threshold to become yellow\n"; + print "-c : critical threshold to become red\n"; + print "-d : Use decimals for percentage (default is $decimals) \n"; + exit 0; +} + +GetOptions("help|h" => \&help, + "w=i" => \$t_warn, + "c=i" => \$t_crit, + "d=i" => \$decimals, +); + +# Get CPU usage +$ENV{LC_ALL}="en_US"; # if mpstat is not run under en_US locale, things may break, so make sure it is +open (MPSTAT, 'mpstat 1 1 |') or die; +while () { + if (/^.*\s+(\d+\.\d+)[\s\x00]?$/) { + $cpu_usage = 100 - $1; # 100% - %idle + last; + } +} +close(MPSTAT); + +$cpu_usage eq -1 and die 'Can\'t find CPU information'; + +# Print short_text, full_text +print "${label}"; +printf "%.${decimals}f%%\n", $cpu_usage; +print "${label}"; +printf "%.${decimals}f%%\n", $cpu_usage; + +# Print color, if needed +if ($cpu_usage >= $t_crit) { + print "#FF0000\n"; + exit 33; +} elsif ($cpu_usage >= $t_warn) { + print "#FFFC00\n"; +} + +exit 0; diff --git a/.config/i3/scripts/disk b/.config/i3/scripts/disk new file mode 100644 index 0000000..c34240d --- /dev/null +++ b/.config/i3/scripts/disk @@ -0,0 +1,48 @@ +#!/bin/sh +# Copyright (C) 2014 Julien Bonjean + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +DIR="${DIR:-$BLOCK_INSTANCE}" +DIR="${DIR:-$HOME}" +ALERT_LOW="${ALERT_LOW:-$1}" +ALERT_LOW="${ALERT_LOW:-10}" # color will turn red under this value (default: 10%) + +LOCAL_FLAG="-l" +if [ "$1" = "-n" ] || [ "$2" = "-n" ]; then + LOCAL_FLAG="" +fi + +df -h -P $LOCAL_FLAG "$DIR" | awk -v label="$LABEL" -v alert_low=$ALERT_LOW ' +/\/.*/ { + # full text + print label $4 + + # short text + print label $4 + + use=$5 + + # no need to continue parsing + exit 0 +} + +END { + gsub(/%$/,"",use) + if (100 - use < alert_low) { + # color + print "#FF0000" + } +} +' diff --git a/.config/i3/scripts/empty_workspace.sh b/.config/i3/scripts/empty_workspace.sh new file mode 100644 index 0000000..b4c28dc --- /dev/null +++ b/.config/i3/scripts/empty_workspace.sh @@ -0,0 +1,10 @@ +#!/bin/bash + +MAX_DESKTOPS=20 + +WORKSPACES=$(seq -s '\n' 1 1 ${MAX_DESKTOPS}) + +EMPTY_WORKSPACE=$( (i3-msg -t get_workspaces | tr ',' '\n' | grep num | awk -F: '{print int($2)}' ; \ + echo -e ${WORKSPACES} ) | sort -n | uniq -u | head -n 1) + +i3-msg workspace ${EMPTY_WORKSPACE} diff --git a/.config/i3/scripts/keyhint.sh b/.config/i3/scripts/keyhint.sh new file mode 100644 index 0000000..e2c09b0 --- /dev/null +++ b/.config/i3/scripts/keyhint.sh @@ -0,0 +1,2 @@ +#!/bin/sh +yad --title="EndeavourOS i3-wm keybindings:" --no-buttons --geometry=400x300-15-400 --list --column=key: --column=description: --column=command: "ESC" "close this app" "" "=" "modkey" "(set mod Mod4)" "+enter" "open a terminal" "" "+w" "open Browser" "" "+n" "open Filebrowser" "" "F9" "app menu" "(rofi)" "+c" "close focused app" "(kill)" "Print-key" "screenshot" "(scrot)" "+Shift+e" "logout menu" "(rofi)" "+F1" "open keybinding helper" "full list" diff --git a/.config/i3/scripts/memory b/.config/i3/scripts/memory new file mode 100644 index 0000000..d79d131 --- /dev/null +++ b/.config/i3/scripts/memory @@ -0,0 +1,69 @@ +#!/bin/sh +# Copyright (C) 2014 Julien Bonjean + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +TYPE="${BLOCK_INSTANCE:-mem}" + +awk -v type=$TYPE ' +/^MemTotal:/ { + mem_total=$2 +} +/^MemFree:/ { + mem_free=$2 +} +/^Buffers:/ { + mem_free+=$2 +} +/^Cached:/ { + mem_free+=$2 +} +/^SwapTotal:/ { + swap_total=$2 +} +/^SwapFree:/ { + swap_free=$2 +} +END { + if (type == "swap") { + free=swap_free/1024/1024 + used=(swap_total-swap_free)/1024/1024 + total=swap_total/1024/1024 + } else { + free=mem_free/1024/1024 + used=(mem_total-mem_free)/1024/1024 + total=mem_total/1024/1024 + } + + pct=0 + if (total > 0) { + pct=used/total*100 + } + + # full text + # printf("%.1fG/%.1fG (%.f%%)\n", used, total, pct) + + # short text + printf("%.f%%\n", pct) + + # color + if (pct > 90) { + print("#FF0000") + } else if (pct > 80) { + print("#FFAE00") + } else if (pct > 70) { + print("#FFF600") + } +} +' /proc/meminfo diff --git a/.config/i3/scripts/openweather.conf b/.config/i3/scripts/openweather.conf new file mode 100644 index 0000000..5d5d2e2 --- /dev/null +++ b/.config/i3/scripts/openweather.conf @@ -0,0 +1,8 @@ +# Weather +[Weather] +command=~/.config/i3/scripts/openweather.sh +interval=1800 +color=#7275b3 + + + diff --git a/.config/i3/scripts/openweather.sh b/.config/i3/scripts/openweather.sh new file mode 100644 index 0000000..7fcef77 --- /dev/null +++ b/.config/i3/scripts/openweather.sh @@ -0,0 +1,40 @@ +#!/usr/bin/env bash + +command -v jq >/dev/null 2>&1 || { echo >&2 "Program 'jq' required but it is not installed. +Aborting."; exit 1; } +command -v wget >/dev/null 2>&1 || { echo >&2 "Program 'wget' required but is not installed. +Aborting."; exit 1; } + +APIKEY="get your key first" +#ZIPCODE="1234" +CITY_ID="Get your City ID first" +URL="http://api.openweathermap.org/data/2.5/weather?id=${CITY_ID}&units=metric&APPID=${APIKEY}" + +WEATHER_RESPONSE=$(wget -qO- "${URL}") + +WEATHER_CONDITION=$(echo $WEATHER_RESPONSE | jq '.weather[0].main' | sed 's/"//g') +WEATHER_TEMP=$(echo $WEATHER_RESPONSE | jq '.main.temp') +WIND_DIR=$( echo "$WEATHER_RESPONSE" | jq '.wind.deg') +WIND_SPEED=$( echo "$WEATHER_RESPONSE" | jq '.wind.speed') + +WIND_SPEED=$(awk "BEGIN {print 60*60*$WIND_SPEED/1000}") +WIND_DIR=$(awk "BEGIN {print int(($WIND_DIR % 360)/22.5)}") +DIR_ARRAY=( N NNE NE ENE E ESE SE SSE S SSW SW WSW W WNW NW NNW N ) +WIND_DIR=${DIR_ARRAY[WIND_DIR]} + +case $WEATHER_CONDITION in + 'Clouds') + WEATHER_ICON="" + ;; + 'Rain') + WEATHER_ICON="" + ;; + 'Snow') + WEATHER_ICON="" + ;; + *) + WEATHER_ICON="" + ;; +esac + +echo "${WEATHER_ICON} ${WEATHER_TEMP}°C: ${WIND_SPEED} km/h ${WIND_DIR}" diff --git a/.config/i3/scripts/shutdown_menu b/.config/i3/scripts/shutdown_menu new file mode 100644 index 0000000..8f0cae1 --- /dev/null +++ b/.config/i3/scripts/shutdown_menu @@ -0,0 +1,187 @@ +#!/usr/bin/env bash +# +# Use rofi/zenity to change system runstate thanks to systemd. +# +# Note: this currently relies on associative array support in the shell. +# +# Inspired from i3pystatus wiki: +# https://github.com/enkore/i3pystatus/wiki/Shutdown-Menu +# +# Copyright 2015 Benjamin Chrétien +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +####################################################################### +# BEGIN CONFIG # +####################################################################### + +# Use a custom lock script +#LOCKSCRIPT="i3lock-extra -m pixelize" + +# Colors to define FG (foreground) BG (background) HL (highlighted) +FG_COLOR="${FG_COLOR:-#ffffff}" +BG_COLOR="${BG_COLOR:-#e608052b}" +HLFG_COLOR="${HLFG_COLOR:-#19ba00}" +HLBG_COLOR="${HLBG_COLOR:-#ffffffff}" +BORDER_COLOR="${BORDER_COLOR:-#00ffffff}" +SEPARATOR_COLOR="${SEPARATOR_COLOR:-#a65556ff}" + +# Options not related to colors +ROFI_TEXT=": " +ROFI_OPTIONS=(${ROFI_OPTIONS:--width 17 -location 5 -hide-scrollbar -bw 30 -padding 15 -color-window "${BG_COLOR},${BORDER_COLOR},${SEPARATOR_COLOR}"}) + +# Zenity options +ZENITY_TITLE="${ZENITY_TITLE:-:}" +ZENITY_TEXT="${ZENITY_TEXT:-Action:}" +ZENITY_OPTIONS=(${ZENITY_OPTIONS:---column= --hide-header}) + +####################################################################### +# END CONFIG # +####################################################################### + +# Whether to ask for user's confirmation +enable_confirmation=${ENABLE_CONFIRMATIONS:-false} + +# Preferred launcher if both are available +preferred_launcher="${LAUNCHER:-rofi}" + +usage="$(basename "$0") [-h] [-c] [-p name] -- display a menu for shutdown, reboot, lock etc. + +where: + -h show this help text + -c ask for user confirmation + -p preferred launcher (rofi or zenity) + +This script depends on: + - systemd, + - i3, + - rofi or zenity." + +# Check whether the user-defined launcher is valid +launcher_list=(rofi zenity) +function check_launcher() { + if [[ ! "${launcher_list[@]}" =~ (^|[[:space:]])"$1"($|[[:space:]]) ]]; then + echo "Supported launchers: ${launcher_list[*]}" + exit 1 + else + # Get array with unique elements and preferred launcher first + # Note: uniq expects a sorted list, so we cannot use it + i=1 + launcher_list=($(for l in "$1" "${launcher_list[@]}"; do printf "%i %s\n" "$i" "$l"; let i+=1; done \ + | sort -uk2 | sort -nk1 | cut -d' ' -f2- | tr '\n' ' ')) + fi +} + +# Parse CLI arguments +while getopts "hcp:" option; do + case "${option}" in + h) echo "${usage}" + exit 0 + ;; + c) enable_confirmation=true + ;; + p) preferred_launcher="${OPTARG}" + check_launcher "${preferred_launcher}" + ;; + *) exit 1 + ;; + esac +done +check_launcher "${preferred_launcher}" + +# Check whether a command exists +function command_exists() { + command -v "$1" &> /dev/null 2>&1 +} + +# systemctl required +if ! command_exists systemctl ; then + exit 1 +fi + +# menu defined as an associative array +typeset -A menu + +# Menu with keys/commands +menu=( + [Shutdown]="systemctl poweroff" + [Reboot]="systemctl reboot" + [Hibernate]="systemctl hibernate" + [Suspend]="systemctl suspend" + [Halt]="systemctl halt" + [Lock]="${LOCKSCRIPT:-i3lock --color=${BG_COLOR#"#"}}" + [Logout]="i3-msg exit" + [Cancel]="" +) +menu_nrows=${#menu[@]} + +# Menu entries that may trigger a confirmation message +menu_confirm="Shutdown Reboot Hibernate Suspend Halt Logout" + +launcher_exe="" +launcher_options="" +rofi_colors="" + +function prepare_launcher() { + if [[ "$1" == "rofi" ]]; then + rofi_colors=(-bc "${BORDER_COLOR}" -bg "${BG_COLOR}" -fg "${FG_COLOR}" \ + -hlfg "${HLFG_COLOR}" -hlbg "${HLBG_COLOR}") + launcher_exe="rofi" + launcher_options=(-dmenu -i -lines "${menu_nrows}" -p "${ROFI_TEXT}" \ + "${rofi_colors[@]}" "${ROFI_OPTIONS[@]}") + elif [[ "$1" == "zenity" ]]; then + launcher_exe="zenity" + launcher_options=(--list --title="${ZENITY_TITLE}" --text="${ZENITY_TEXT}" \ + "${ZENITY_OPTIONS[@]}") + fi +} + +for l in "${launcher_list[@]}"; do + if command_exists "${l}" ; then + prepare_launcher "${l}" + break + fi +done + +# No launcher available +if [[ -z "${launcher_exe}" ]]; then + exit 1 +fi + +launcher=(${launcher_exe} "${launcher_options[@]}") +selection="$(printf '%s\n' "${!menu[@]}" | sort | "${launcher[@]}")" + +function ask_confirmation() { + if [ "${launcher_exe}" == "rofi" ]; then + confirmed=$(echo -e "Yes\nNo" | rofi -dmenu -i -lines 2 -p "${selection}?" \ + "${rofi_colors[@]}" "${ROFI_OPTIONS[@]}") + [ "${confirmed}" == "Yes" ] && confirmed=0 + elif [ "${launcher_exe}" == "zenity" ]; then + zenity --question --text "Are you sure you want to ${selection,,}?" + confirmed=$? + fi + + if [ "${confirmed}" == 0 ]; then + i3-msg -q "exec ${menu[${selection}]}" + fi +} + +if [[ $? -eq 0 && ! -z ${selection} ]]; then + if [[ "${enable_confirmation}" = true && \ + ${menu_confirm} =~ (^|[[:space:]])"${selection}"($|[[:space:]]) ]]; then + ask_confirmation + else + i3-msg -q "exec ${menu[${selection}]}" + fi +fi diff --git a/.config/i3/scripts/temperature b/.config/i3/scripts/temperature new file mode 100644 index 0000000..2170f10 --- /dev/null +++ b/.config/i3/scripts/temperature @@ -0,0 +1,69 @@ +#!/usr/bin/env perl +# Copyright 2014 Pierre Mavro +# Copyright 2014 Vivien Didelot +# Copyright 2014 Andreas Guldstrand +# Copyright 2014 Benjamin Chretien + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +use strict; +use warnings; +use utf8; +use Getopt::Long; + +binmode(STDOUT, ":utf8"); + +# default values +my $t_warn = $ENV{T_WARN} || 70; +my $t_crit = $ENV{T_CRIT} || 90; +my $chip = $ENV{SENSOR_CHIP} || ""; +my $temperature = -9999; + +sub help { + print "Usage: temperature [-w ] [-c ] [--chip ]\n"; + print "-w : warning threshold to become yellow\n"; + print "-c : critical threshold to become red\n"; + print "--chip : sensor chip\n"; + exit 0; +} + +GetOptions("help|h" => \&help, + "w=i" => \$t_warn, + "c=i" => \$t_crit, + "chip=s" => \$chip); + +# Get chip temperature +open (SENSORS, "sensors -u $chip |") or die; +while () { + if (/^\s+temp1_input:\s+[\+]*([\-]*\d+\.\d)/) { + $temperature = $1; + last; + } +} +close(SENSORS); + +$temperature eq -9999 and die 'Cannot find temperature'; + +# Print short_text, full_text +print "$temperature°C\n" x2; + +# Print color, if needed +if ($temperature >= $t_crit) { + print "#FF0000\n"; + exit 33; +} elsif ($temperature >= $t_warn) { + print "#FFFC00\n"; +} + +exit 0; diff --git a/.config/i3/scripts/volume b/.config/i3/scripts/volume new file mode 100644 index 0000000..6e0c4fe --- /dev/null +++ b/.config/i3/scripts/volume @@ -0,0 +1,83 @@ +#!/usr/bin/env bash +# Copyright (C) 2014 Julien Bonjean +# Copyright (C) 2014 Alexander Keller + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +#------------------------------------------------------------------------ + +# The second parameter overrides the mixer selection +# For PulseAudio users, eventually use "pulse" +# For Jack/Jack2 users, use "jackplug" +# For ALSA users, you may use "default" for your primary card +# or you may use hw:# where # is the number of the card desired +if [[ -z "$MIXER" ]] ; then + MIXER="default" + if command -v pulseaudio >/dev/null 2>&1 && pulseaudio --check ; then + # pulseaudio is running, but not all installations use "pulse" + if amixer -D pulse info >/dev/null 2>&1 ; then + MIXER="pulse" + fi + fi + [ -n "$(lsmod | grep jack)" ] && MIXER="jackplug" + MIXER="${2:-$MIXER}" +fi + +# The instance option sets the control to report and configure +# This defaults to the first control of your selected mixer +# For a list of the available, use `amixer -D $Your_Mixer scontrols` +if [[ -z "$SCONTROL" ]] ; then + SCONTROL="${BLOCK_INSTANCE:-$(amixer -D $MIXER scontrols | + sed -n "s/Simple mixer control '\([^']*\)',0/\1/p" | + head -n1 + )}" +fi + +# The first parameter sets the step to change the volume by (and units to display) +# This may be in in % or dB (eg. 5% or 3dB) +if [[ -z "$STEP" ]] ; then + STEP="${1:-5%}" +fi + +#------------------------------------------------------------------------ + +capability() { # Return "Capture" if the device is a capture device + amixer -D $MIXER get $SCONTROL | + sed -n "s/ Capabilities:.*cvolume.*/Capture/p" +} + +volume() { + amixer -D $MIXER get $SCONTROL $(capability) +} + +format() { + + perl_filter='if (/.*\[(\d+%)\] (\[(-?\d+.\d+dB)\] )?\[(on|off)\]/)' + perl_filter+='{CORE::say $4 eq "off" ? "MUTE" : "' + # If dB was selected, print that instead + perl_filter+=$([[ $STEP = *dB ]] && echo '$3' || echo '$1') + perl_filter+='"; exit}' + output=$(perl -ne "$perl_filter") + echo "$LABEL$output" +} + +#------------------------------------------------------------------------ + +case $BLOCK_BUTTON in + 3) amixer -q -D $MIXER sset $SCONTROL $(capability) toggle ;; # right click, mute/unmute + 4) amixer -q -D $MIXER sset $SCONTROL $(capability) ${STEP}+ unmute ;; # scroll up, increase + 5) amixer -q -D $MIXER sset $SCONTROL $(capability) ${STEP}- unmute ;; # scroll down, decrease +esac + +volume | format diff --git a/.config/nitrogen/bg-saved.cfg b/.config/nitrogen/bg-saved.cfg new file mode 100644 index 0000000..9856d14 --- /dev/null +++ b/.config/nitrogen/bg-saved.cfg @@ -0,0 +1,3 @@ +[xin_-1] +file=~/.config/i3/eos-i3_4096x2304_001.png +bgcolor=#000000 diff --git a/.config/nitrogen/nitrogen.cfg b/.config/nitrogen/nitrogen.cfg new file mode 100644 index 0000000..89236f0 --- /dev/null +++ b/.config/nitrogen/nitrogen.cfg @@ -0,0 +1,12 @@ +[geometry] +posx=1280 +posy=22 +sizex=800 +sizey=600 + +[nitrogen] +view=list +recurse=true +sort=alpha +icon_caps=false +dirs=~/.config/i3/; diff --git a/.config/picom.conf b/.config/picom.conf new file mode 100644 index 0000000..53011bd --- /dev/null +++ b/.config/picom.conf @@ -0,0 +1,229 @@ +# Thank you code_nomad: http://9m.no/ꪯ鵞 +# and Arch Wiki contributors: https://wiki.archlinux.org/index.php/Compton + +################################# +# +# Backend +# +################################# + +# Backend to use: "xrender" or "glx". +# GLX backend is typically much faster but depends on a sane driver. +backend = "glx"; + +################################# +# +# GLX backend +# +################################# + +glx-no-stencil = true; + +# GLX backend: Copy unmodified regions from front buffer instead of redrawing them all. +# My tests with nvidia-drivers show a 10% decrease in performance when the whole screen is modified, +# but a 20% increase when only 1/4 is. +# My tests on nouveau show terrible slowdown. +glx-copy-from-front = false; + +# GLX backend: Use MESA_copy_sub_buffer to do partial screen update. +# My tests on nouveau shows a 200% performance boost when only 1/4 of the screen is updated. +# May break VSync and is not available on some drivers. +# Overrides --glx-copy-from-front. +# glx-use-copysubbuffermesa = true; + +# GLX backend: Avoid rebinding pixmap on window damage. +# Probably could improve performance on rapid window content changes, but is known to break things on some drivers (LLVMpipe). +# Recommended if it works. +# glx-no-rebind-pixmap = true; + +# GLX backend: GLX buffer swap method we assume. +# Could be undefined (0), copy (1), exchange (2), 3-6, or buffer-age (-1). +# undefined is the slowest and the safest, and the default value. +# copy is fastest, but may fail on some drivers, +# 2-6 are gradually slower but safer (6 is still faster than 0). +# Usually, double buffer means 2, triple buffer means 3. +# buffer-age means auto-detect using GLX_EXT_buffer_age, supported by some drivers. +# Useless with --glx-use-copysubbuffermesa. +# Partially breaks --resize-damage. +# Defaults to undefined. +#glx-swap-method = "undefined"; + +################################# +# +# Shadows +# +################################# + +# Enabled client-side shadows on windows. +shadow = false; +# The blur radius for shadows. (default 12) +shadow-radius = 5; +# The left offset for shadows. (default -15) +shadow-offset-x = -5; +# The top offset for shadows. (default -15) +shadow-offset-y = -5; +# The translucency for shadows. (default .75) +shadow-opacity = 0.5; + +# Set if you want different colour shadows +# shadow-red = 0.0; +# shadow-green = 0.0; +# shadow-blue = 0.0; + +# The shadow exclude options are helpful if you have shadows enabled. Due to the way picom draws its shadows, certain applications will have visual glitches +# (most applications are fine, only apps that do weird things with xshapes or argb are affected). +# This list includes all the affected apps I found in my testing. The "! name~=''" part excludes shadows on any "Unknown" windows, this prevents a visual glitch with the XFWM alt tab switcher. +shadow-exclude = [ + "! name~=''", + "name = 'Notification'", + "name = 'Plank'", + "name = 'Docky'", + "name = 'Kupfer'", + "name = 'xfce4-notifyd'", + "name *= 'VLC'", + "name *= 'compton'", + "name *= 'picom'", + "name *= 'Chromium'", + "name *= 'Chrome'", + "class_g = 'Firefox' && argb", + "class_g = 'Conky'", + "class_g = 'Kupfer'", + "class_g = 'Synapse'", + "class_g ?= 'Notify-osd'", + "class_g ?= 'Cairo-dock'", + "class_g ?= 'Xfce4-notifyd'", + "class_g ?= 'Xfce4-power-manager'", + "_GTK_FRAME_EXTENTS@:c", + "_NET_WM_STATE@:32a *= '_NET_WM_STATE_HIDDEN'" +]; +# Avoid drawing shadow on all shaped windows (see also: --detect-rounded-corners) +shadow-ignore-shaped = false; + +################################# +# +# Opacity +# +################################# + +inactive-opacity = 1; +active-opacity = 1; +frame-opacity = 1; +inactive-opacity-override = false; + +# Dim inactive windows. (0.0 - 1.0) +# inactive-dim = 0.2; +# Do not let dimness adjust based on window opacity. +# inactive-dim-fixed = true; +# Blur background of transparent windows. Bad performance with X Render backend. GLX backend is preferred. +# blur-background = true; +# Blur background of opaque windows with transparent frames as well. +# blur-background-frame = true; +# Do not let blur radius adjust based on window opacity. +blur-background-fixed = false; +blur-background-exclude = [ + "window_type = 'dock'", + "window_type = 'desktop'" +]; + +################################# +# +# Fading +# +################################# + +# Fade windows during opacity changes. +fading = true; +# The time between steps in a fade in milliseconds. (default 10). +fade-delta = 4; +# Opacity change between steps while fading in. (default 0.028). +fade-in-step = 0.03; +# Opacity change between steps while fading out. (default 0.03). +fade-out-step = 0.03; +# Fade windows in/out when opening/closing +# no-fading-openclose = true; + +# Specify a list of conditions of windows that should not be faded. +fade-exclude = [ ]; + +################################# +# +# Other +# +################################# + +# Try to detect WM windows and mark them as active. +mark-wmwin-focused = true; +# Mark all non-WM but override-redirect windows active (e.g. menus). +mark-ovredir-focused = true; +# Use EWMH _NET_WM_ACTIVE_WINDOW to determine which window is focused instead of using FocusIn/Out events. +# Usually more reliable but depends on a EWMH-compliant WM. +use-ewmh-active-win = true; +# Detect rounded corners and treat them as rectangular when --shadow-ignore-shaped is on. +detect-rounded-corners = true; + +# Detect _NET_WM_OPACITY on client windows, useful for window managers not passing _NET_WM_OPACITY of client windows to frame windows. +# This prevents opacity being ignored for some apps. +# For example without this enabled my xfce4-notifyd is 100% opacity no matter what. +detect-client-opacity = true; + +# Specify refresh rate of the screen. +# If not specified or 0, picom will try detecting this with X RandR extension. +refresh-rate = 0; + +# Vertical synchronization: match the refresh rate of the monitor +# Enable/disable VSync. +#vsync = true; +vsync = false; + +# Enable DBE painting mode, intended to use with VSync to (hopefully) eliminate tearing. +# Reported to have no effect, though. +dbe = false; + +# Limit picom to repaint at most once every 1 / refresh_rate second to boost performance. +# This should not be used with --vsync drm/opengl/opengl-oml as they essentially does --sw-opti's job already, +# unless you wish to specify a lower refresh rate than the actual value. +#sw-opti = true; + +# Unredirect all windows if a full-screen opaque window is detected, to maximize performance for full-screen windows, like games. +# Known to cause flickering when redirecting/unredirecting windows. +unredir-if-possible = false; + +# Specify a list of conditions of windows that should always be considered focused. +focus-exclude = [ ]; + +# Use WM_TRANSIENT_FOR to group windows, and consider windows in the same group focused at the same time. +detect-transient = true; +# Use WM_CLIENT_LEADER to group windows, and consider windows in the same group focused at the same time. +# WM_TRANSIENT_FOR has higher priority if --detect-transient is enabled, too. +detect-client-leader = true; + +################################# +# +# Window type settings +# +################################# + +wintypes: +{ + tooltip = + { + # fade: Fade the particular type of windows. + fade = true; + # shadow: Give those windows shadow + shadow = false; + # opacity: Default opacity for the type of windows. + opacity = 0.85; + # focus: Whether to always consider windows of this type focused. + focus = true; + }; +}; + +###################### +# +# XSync +# See: https://github.com/yshui/picom/commit/b18d46bcbdc35a3b5620d817dd46fbc76485c20d +# +###################### + +# Use X Sync fence to sync clients' draw calls. Needed on nvidia-drivers with GLX backend for some users. +xrender-sync-fence = true; diff --git a/.config/rofi/config.rasi b/.config/rofi/config.rasi new file mode 100644 index 0000000..8e3ca47 --- /dev/null +++ b/.config/rofi/config.rasi @@ -0,0 +1,12 @@ +/* Theme EndeavourOS i3 +https://raw.githubusercontent.com/endeavouros-team/i3-EndeavourOS/master/.config/rofi/config.rasi +Maintainer: joekamprad [joekamprad@endeavouros.com] +Visual Designer: Florent Valetti [@FLVAL EndeavourOS] +https://endeavouros.com +*/ +configuration { + color-normal: "argb:e6001b33, #ffffff, argb:0008052B, argb:4d101010, #ff7f7f"; + color-urgent: "argb:e6001b33, #ffffff, argb:0008052B, argb:0008052B, #24ffef"; + color-active: "argb:e6001b33, #ffffff, argb:0008052B, argb:0008052B, #24ffef"; + color-window: "argb:e6001b33, argb:0008052B, argb:bf5556ff"; +} diff --git a/.config/xfce4/terminal/accels.scm b/.config/xfce4/terminal/accels.scm new file mode 100644 index 0000000..a3cb7b1 --- /dev/null +++ b/.config/xfce4/terminal/accels.scm @@ -0,0 +1,58 @@ +; xfce4-terminal GtkAccelMap rc-file -*- scheme -*- +; this file is an automated accelerator map dump +; +(gtk_accel_path "/terminal-window/goto-tab-2" "2") +(gtk_accel_path "/terminal-window/goto-tab-6" "6") +; (gtk_accel_path "/terminal-window/copy-input" "") +; (gtk_accel_path "/terminal-window/close-other-tabs" "") +; (gtk_accel_path "/terminal-window/move-tab-right" "Page_Down") +(gtk_accel_path "/terminal-window/goto-tab-7" "7") +; (gtk_accel_path "/terminal-window/set-title-color" "") +; (gtk_accel_path "/terminal-window/edit-menu" "") +; (gtk_accel_path "/terminal-window/zoom-menu" "") +(gtk_accel_path "/terminal-window/goto-tab-1" "1") +; (gtk_accel_path "/terminal-window/fullscreen" "F11") +; (gtk_accel_path "/terminal-window/read-only" "") +; (gtk_accel_path "/terminal-window/preferences" "") +; (gtk_accel_path "/terminal-window/reset-and-clear" "") +; (gtk_accel_path "/terminal-window/about" "") +(gtk_accel_path "/terminal-window/goto-tab-5" "5") +; (gtk_accel_path "/terminal-window/close-window" "q") +; (gtk_accel_path "/terminal-window/reset" "") +; (gtk_accel_path "/terminal-window/save-contents" "") +(gtk_accel_path "/terminal-window/toggle-menubar" "F10") +; (gtk_accel_path "/terminal-window/copy" "c") +; (gtk_accel_path "/terminal-window/copy-html" "") +; (gtk_accel_path "/terminal-window/last-active-tab" "") +; (gtk_accel_path "/terminal-window/show-borders" "") +; (gtk_accel_path "/terminal-window/view-menu" "") +; (gtk_accel_path "/terminal-window/detach-tab" "d") +; (gtk_accel_path "/terminal-window/scroll-on-output" "") +; (gtk_accel_path "/terminal-window/show-toolbar" "") +; (gtk_accel_path "/terminal-window/next-tab" "Page_Down") +; (gtk_accel_path "/terminal-window/tabs-menu" "") +; (gtk_accel_path "/terminal-window/search-next" "") +; (gtk_accel_path "/terminal-window/search-prev" "") +; (gtk_accel_path "/terminal-window/undo-close-tab" "") +; (gtk_accel_path "/terminal-window/set-title" "s") +; (gtk_accel_path "/terminal-window/contents" "F1") +; (gtk_accel_path "/terminal-window/zoom-reset" "0") +; (gtk_accel_path "/terminal-window/close-tab" "w") +; (gtk_accel_path "/terminal-window/new-tab" "t") +; (gtk_accel_path "/terminal-window/new-window" "n") +; (gtk_accel_path "/terminal-window/terminal-menu" "") +; (gtk_accel_path "/terminal-window/show-menubar" "") +; (gtk_accel_path "/terminal-window/select-all" "a") +; (gtk_accel_path "/terminal-window/paste" "v") +(gtk_accel_path "/terminal-window/goto-tab-9" "9") +; (gtk_accel_path "/terminal-window/move-tab-left" "Page_Up") +; (gtk_accel_path "/terminal-window/search" "f") +; (gtk_accel_path "/terminal-window/file-menu" "") +; (gtk_accel_path "/terminal-window/prev-tab" "Page_Up") +; (gtk_accel_path "/terminal-window/paste-selection" "") +; (gtk_accel_path "/terminal-window/zoom-in" "plus") +; (gtk_accel_path "/terminal-window/zoom-out" "minus") +(gtk_accel_path "/terminal-window/goto-tab-8" "8") +; (gtk_accel_path "/terminal-window/help-menu" "") +(gtk_accel_path "/terminal-window/goto-tab-4" "4") +(gtk_accel_path "/terminal-window/goto-tab-3" "3") diff --git a/.config/xfce4/terminal/terminalrc b/.config/xfce4/terminal/terminalrc new file mode 100644 index 0000000..f6bd494 --- /dev/null +++ b/.config/xfce4/terminal/terminalrc @@ -0,0 +1,44 @@ +[Configuration] +BackgroundDarkness=0.860000 +MiscSearchDialogOpacity=100 +MiscShowUnsafePasteDialog=FALSE +BackgroundMode=TERMINAL_BACKGROUND_TRANSPARENT +FontUseSystem=TRUE +MiscAlwaysShowTabs=FALSE +MiscBell=FALSE +MiscBellUrgent=FALSE +MiscBordersDefault=TRUE +MiscCursorBlinks=FALSE +MiscCursorShape=TERMINAL_CURSOR_SHAPE_BLOCK +MiscDefaultGeometry=100x30 +MiscInheritGeometry=FALSE +MiscMenubarDefault=FALSE +MiscMouseAutohide=FALSE +MiscMouseWheelZoom=TRUE +MiscToolbarDefault=FALSE +MiscConfirmClose=TRUE +MiscCycleTabs=TRUE +MiscTabCloseButtons=TRUE +MiscTabCloseMiddleClick=TRUE +MiscTabPosition=GTK_POS_TOP +MiscHighlightUrls=TRUE +MiscMiddleClickOpensUri=FALSE +MiscCopyOnSelect=FALSE +MiscShowRelaunchDialog=TRUE +MiscRewrapOnResize=TRUE +MiscUseShiftArrowsToScroll=FALSE +MiscSlimTabs=TRUE +MiscNewTabAdjacent=FALSE +ColorForeground=#e3e3ea +ColorBackground=#08052b +ColorPalette=rgb(8,5,43);rgb(255,127,127);rgb(71,179,93);rgb(204,57,128);rgb(127,186,255);rgb(127,63,191);rgb(127,127,255);rgb(205,204,219);rgb(127,186,255);rgb(255,127,127);rgb(153,153,204);rgb(255,127,127);rgb(127,127,255);rgb(127,63,191);rgb(127,127,255);rgb(227,227,234) +ColorCursor=#ff7f7f +ColorCursorForeground=#FFFFFF +ColorBold=#7fbaff +TabActivityColor=#47B35D +ColorCursorUseDefault=FALSE +ColorBoldIsBright=FALSE +ScrollingUnlimited=TRUE +TitleMode=TERMINAL_TITLE_REPLACE +ScrollingBar=TERMINAL_SCROLLBAR_NONE +TextBlinkMode=TERMINAL_TEXT_BLINK_MODE_FOCUSED diff --git a/.gtkrc-2.0 b/.gtkrc-2.0 new file mode 100644 index 0000000..37d94d9 --- /dev/null +++ b/.gtkrc-2.0 @@ -0,0 +1,19 @@ +# DO NOT EDIT! This file will be overwritten by LXAppearance. +# Any customization should be done in ~/.gtkrc-2.0.mine instead. + +include "~/.gtkrc-2.0.mine" +gtk-theme-name="Arc-Dark" +gtk-icon-theme-name="Arc-X-D" +gtk-font-name="Noto Sans 11" +gtk-cursor-theme-name="capitaine-cursors-light" +gtk-cursor-theme-size=0 +gtk-toolbar-style=GTK_TOOLBAR_BOTH_HORIZ +gtk-toolbar-icon-size=GTK_ICON_SIZE_LARGE_TOOLBAR +gtk-button-images=0 +gtk-menu-images=0 +gtk-enable-event-sounds=1 +gtk-enable-input-feedback-sounds=1 +gtk-xft-antialias=1 +gtk-xft-hinting=1 +gtk-xft-hintstyle="hintmedium" +gtk-xft-rgba="rgb" diff --git a/LICENSE b/LICENSE new file mode 100644 index 0000000..f288702 --- /dev/null +++ b/LICENSE @@ -0,0 +1,674 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + Copyright (C) + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +. diff --git a/README.md b/README.md new file mode 100644 index 0000000..3a5f32b --- /dev/null +++ b/README.md @@ -0,0 +1,89 @@ +# i3-EndeavourOS +## joekamprad: setup for i3 under [EndeavourOS](https://endeavouros.com) + +# Tutorial for i3-wm settings: +* background handled by [nitrogen](https://wiki.archlinux.org/index.php/nitrogen) +* gtk3 theme handled by [lxappearance-gtk3](https://wiki.lxde.org/de/LXAppearance) +* Filebrowser = [Thunar](https://docs.xfce.org/xfce/thunar/start) +* default Terminal-Emulator = [xfce4-terminal](https://docs.xfce.org/apps/terminal/start) +* Text-Editor = [xed](https://github.com/linuxmint/xed) + +# Main shortcuts: +[mod] key is set to the winkey (or should i call it linkey?) + +![alt text](https://raw.githubusercontent.com/endeavouros-team/screenshots/master/linkey.png "modkey") + +* [mod]+**enter** = open terminal (xfce4-terminal) +* [mod]+**w** = open Browser (firefox) +* [mod]+**n** = open Filebrowser (thunar) +* **F9** = app menu (rofi) +* **$mod+c** = close focused app [kill] +* **Print**-key = screenshot (scrot) + +# default i3-wm keycodes: +https://i3wm.org/docs/userguide.html#_default_keybindings + +# Tiling: +is set to default for i3wm and can be changed to: +* stacking: +Only the focused window in the container is displayed. You get a list of windows at the top of the container. + +* tabbed: +so each new window will open fullscreen as a tab, you can change between window-tabs with mouse or shortcut: +[mod]+**Left** focus left (left arrow key) +[mod]+**Right** focus right (right arrow key) + +# i3blocks: +![alt text](https://raw.githubusercontent.com/endeavouros-team/screenshots/master/i3-block.png "i3blocks") +* pulseaudio (mousewheel volume level, rightclick open pulseaudio control) +* weather (openweather you need to get city code and apikey first [adding it to ~/.config/i3/scripts/openweather.sh]) +get your api key here: https://openweathermap.org/appid and City code: https://openweathermap.org/find?q= (search your city and take the city code from the url in your browser [7 numbers at the end of the url]) +* tray-icons (showing network-manager and update-icon) +* logout button (poweroff, logout, suspending, hibernate e.t.c.) + +# panel bar (i3-blocks): +![alt text](https://raw.githubusercontent.com/endeavouros-team/screenshots/master/i3-block-bar-tutorial-tp.png "bar legende") +* CONFIG FILE = ~/.config/i3/i3blocks.conf +# Logout Menu: +![alt text](https://raw.githubusercontent.com/endeavouros-team/i3-fresh/master/images/2020-11-29_23-17_1.png "logout-menu") +* CONFIG FILE = ~/.config/i3/i3blocks.conf +# application menu (rofi): +![alt text](https://raw.githubusercontent.com/endeavouros-team/i3-fresh/master/images/2020-11-29_23-18.png "application-menu") +* color scheme = ~/.Xresources + +# Notifications are done with dunst: +![alt text](https://raw.githubusercontent.com/endeavouros-team/screenshots/master/dunst-i3-enOS.png "dunst-notification") +* CONFIG FILE = ~/.config/dunst/dunstrc + +![alt text](https://raw.githubusercontent.com/endeavouros-team/screenshots/master/i3-desktop.png "i3-running") + +login to i3. + +# If you need to change something to fit your needs start at the full wiki at EndeavourOS wiki page: + +https://endeavouros.com/docs/window-tiling-managers/i3-wm/ + +---- + +# Tutorial to install EndeavourOS-i3 setup from scratch +**for later installs, if you have installed another DE on initial install from the ISO** + +1. get the dot files +2. copy files to the right directories (.config of your user): +3. copy scripts inside ~/.config/i3/scripts must be executable ! [chmod +x] them please ;) +4. install needed packages + +`git clone https://github.com/endeavouros-team/i3-EndeavourOS.git` + +`cd i3-EndeavourOS` + +`cp -R .config/* ~/.config/` + +`chmod -R +x ~/.config/i3/scripts` (make scripts executable) + +`cp .Xresources ~/` (needed colorcheme for menu) + +# install needed apps and programms for i3wm: + +`sudo pacman -S --needed - < packages-repository.txt` + diff --git a/eos-i3_4096x2304_001.png b/eos-i3_4096x2304_001.png new file mode 100644 index 0000000..91484ac Binary files /dev/null and b/eos-i3_4096x2304_001.png differ diff --git a/images/2020-11-29_20-45.png b/images/2020-11-29_20-45.png new file mode 100644 index 0000000..e318cd4 Binary files /dev/null and b/images/2020-11-29_20-45.png differ diff --git a/images/2020-11-29_23-04.png b/images/2020-11-29_23-04.png new file mode 100644 index 0000000..03f4478 Binary files /dev/null and b/images/2020-11-29_23-04.png differ diff --git a/images/2020-11-29_23-15.png b/images/2020-11-29_23-15.png new file mode 100644 index 0000000..f7a6401 Binary files /dev/null and b/images/2020-11-29_23-15.png differ diff --git a/images/2020-11-29_23-17.png b/images/2020-11-29_23-17.png new file mode 100644 index 0000000..8547c27 Binary files /dev/null and b/images/2020-11-29_23-17.png differ diff --git a/images/2020-11-29_23-17_1.png b/images/2020-11-29_23-17_1.png new file mode 100644 index 0000000..d1ca19b Binary files /dev/null and b/images/2020-11-29_23-17_1.png differ diff --git a/images/2020-11-29_23-18.png b/images/2020-11-29_23-18.png new file mode 100644 index 0000000..de72fa4 Binary files /dev/null and b/images/2020-11-29_23-18.png differ diff --git a/images/2020-11-29_23-20.png b/images/2020-11-29_23-20.png new file mode 100644 index 0000000..1311155 Binary files /dev/null and b/images/2020-11-29_23-20.png differ diff --git a/injecting_scriplet b/injecting_scriplet new file mode 100644 index 0000000..195fd2c --- /dev/null +++ b/injecting_scriplet @@ -0,0 +1,17 @@ +_desktop_i3(){ + # i3 configs here + # Note: variable 'desktop' from '_another_case' is visible here too! + + git clone https://github.com/endeavouros-team/i3-EndeavourOS.git + pushd i3-EndeavourOS >/dev/null + cp -R .config /home/$NEW_USER/ + cp -R .config ~/ + chmod -R +x ~/.config/i3/scripts /home/$NEW_USER/.config/i3/scripts + cp .Xresources ~/ + cp .Xresources /home/$NEW_USER/ + cp .gtkrc-2.0 ~/ + cp .gtkrc-2.0 /home/$NEW_USER/ + chown -R $NEW_USER:users /home/$NEW_USER/.config /home/$NEW_USER/.Xresources + popd >/dev/null + rm -rf i3-EndeavourOS +} diff --git a/packages-repository.txt b/packages-repository.txt new file mode 100644 index 0000000..9d442b0 --- /dev/null +++ b/packages-repository.txt @@ -0,0 +1,46 @@ +i3-gaps +i3blocks +i3lock +i3status +network-manager-applet +arandr +archlinux-xdg-menu +lxappearance-gtk3 +otf-font-awesome +dmenu +polkit-gnome +xdg-user-dirs-gtk +thunar +thunar-archive-plugin +thunar-volman +file-roller +tumbler +xfce4-terminal +lightdm +lightdm-gtk-greeter +lightdm-gtk-greeter-settings +acpi +sysstat +nitrogen +bluez-utils +rofi +xcursor-neutral +xbindkeys +pulseaudio +paprefs +pavucontrol +scrot +xorg-xdpyinfo +dex +picom +xed +jq +feh +dunst +arc-x-icons-theme +arc-gtk-theme +capitaine-cursors +galculator +gtk-engine-murrine +system-config-printer +seahorse